When it comes to gardening tools, a weed eater is one that can prove to be most useful. This is an essential for lawn maintenance. Nonetheless, in many instances, it can also prove to be problematic, especially if you do not pay attention to proper care and maintenance. In the case of the latter, expect that the equipment will not be able to deliver optimal functionality.
There are many problems that could hinder the weed eater from performing at its best. Among others, one of the common issues is that the weed eater won’t start. What is wrong with your weed eater? How can you address the issue? Below, we will identify some of the possible problems and how you can quickly troubleshoot them to bring your weed eater back to life.
Starting it the Wrong Way
In most instances, the problem is that you are not starting the engine the right way. In most instances, a single pull will already get the machine to start working. In some cases, however, after several pulls, you will end up in frustration because it will not start. The best thing that you can do is to read the manual from the manufacturer and follow their instructions.
If your weed eater comes with a choke, you should know that you need to pull the string about three to seven times. If the weed eater is still not working, the next thing you have to do is to turn the choke, which will prevent flooding of the engine.
There are also some weed eaters with a priming bulb. You may need to press it for a couple of times to activate the carburetor and for the unit to start.
Problems with Fuel
If you are using a weed eater that uses gasoline and if it won’t start, the problem most probably has something to do with fuel. One thing that is possible is that you have a stale fuel. Remove any remaining fuel in the tank and replace it with a new one. You can also use a siphon tube to get rid of remaining fuel, aside from turning the unit upside down. Aside from being stale, the problem could be as simple as having low fuel level.
The wrong fuel or the wrong mixture is also another thing that will prevent the weed eater from starting. In most models, you will need to combine one-part 2-cycle oil with 40 parts of unleaded gas.
Problems with the Engine
There are also times when you have to look at the engine as this can be the source of the problem. The engine is possibly suffering from wear and tear, and hence, making it deliver inferior functionality. Proper care and maintenance are necessary to ensure the best performance of your weed eater even through the years.
One of the most important parts of the engine is the carburetor and this can be the source of the problem. The dirt and dust in the carburetor can cause a blockage, so it would be best to remove it. This is also where you can find the primer bulb and you might need to replace it as well. In worst cases, you have to replace the entire carburetor. The good news is that it comes with a reasonable price.
Problems with Spark Plugs
If the spark plug is malfunctioning, the engine will not be able to create a spark that will initiate the functionality of the unit. It can be faulty or dirty. In most situations, a simple cleaning will be effective to allow the weed eater to start.
To clean the spark plug, remove it from the unit using a spark wrench. Use a file to clean the electrodes. An old toothbrush with soft bristle will also do the job. Inspect the plug as well and see if there are cracks or gaps, among other physical problems. These might be indications that a simple cleaning will no longer suffice and you need to replace it. Spark plugs are also inexpensive, so replacing it should not be a big problem on your end.
Problems with Electrical Systems
If you are using an electric weed eater, you need to check possible electrical issues. The problem could be as simple as not being properly plugged in the supply of electricity. See to it as well that the supply of electricity satisfies the voltage requirements of the unit. Check the outlet and make sure it is drawing power. The fuse and the circuit breaker can also be problematic.
In the case of weed eaters that operate through a battery, the problem is as simple as having a drained battery. Charge it before using. A battery replacement might also be necessary.
Finally, if you are going to buy a new weed eater, make sure you check out our reviews here before buying one.